Robustel M1000 Pro V2 Quick Guide Manual de usuario descargar pdf

Robustel GoRugged M1000 Pro V2 Quick Guide

RT_QG_M1000 Pro V2_v.1.0.0 24.01.2014 1 / 6

Robustel GoRugged M1000 Pro V2 Quick Guide

Chapter 1. Interface Introduction

1.1 Overview

1.2 LED Indicators

After inserting the SIM card into the modem and power on, the LED indicators’ status should be as follow when work

normally:

Name

Color

Status

RSSI (3 LEDs)

Green

At least two bars

NET

Red

SYS

Green

System is running normally but without any GPRS/UMTS connection: blinking every 1s

System is running normally and GPRS/UMTS connection established: blinking every 3s

PWR

Green

On when DC power connected

Note

：

Please refer to Robustel GoRugged M1000 Pro V2 User Guide to get more details about the LED indicators.

1 2 3 4 5 6

Robustel GoRugged M1000 Pro V2 Quick Guide RT_QG_M1000 Pro V2_v.1.0.0 24.01.2014 1 / 6 Robustel GoRugged M1000 Pro V2 Quick Guide Chapter 1. Inter

Robustel GoRugged M1000 Pro V2 Quick Guide RT_QG_M1000 Pro V2_v.1.0.0 24.01.2014 2 / 6 1.3 Working Mode Switch There are two working modes av

Robustel GoRugged M1000 Pro V2 Quick Guide RT_QG_M1000 Pro V2_v.1.0.0 24.01.2014 3 / 6 1.5 Grounding the Modem Grounding and wire routing help

Robustel GoRugged M1000 Pro V2 Quick Guide RT_QG_M1000 Pro V2_v.1.0.0 24.01.2014 4 / 6 Note: 1. Don’t forget screw the cover for again-theft. 2.

Robustel GoRugged M1000 Pro V2 Quick Guide RT_QG_M1000 Pro V2_v.1.0.0 24.01.2014 5 / 6 2.3 Power On and Connect with PC User can use the serial

Robustel GoRugged M1000 Pro V2 Quick Guide RT_QG_M1000 Pro V2_v.1.0.0 24.01.2014 6 / 6 3. Select correct COM port, then click button. A

Sin comentarios

Robustel M1000 Pro V2 Quick Guide Manual de usuario