Robustel M1000 UP Quick Guide Manual de usuario descargar pdf

Robustel GoRugged M1000 UP Quick Guide

RT_QG_M1000 UP_v.1.0.0 25.01.2014 1 / 7

Robustel GoRugged M1000 UP Quick Guide

Chapter 1. Interface Introduction

1.1 Overview

1.2 LED Indicator

After inserting the SIM card into the modem and power on, the LED indicator’s status should be as follow when work

normally:

Name

Status

RUN

1.3 USB interface

USB

USB interface can be used for configuration, sending/receiving data and

power supply.

When USB interface of M1000 UP is used for

sending/receiving data as well as power supply, current/voltage output of

USB interface which connects to M1000 UP’s USB interface shall at least

reach to 1A/5V.

Note: Normally, current/voltage output of laptop’s USB 2.0 interface is only

0.5A/5V. So when you use USB interface for sending/receiving data, you

should use power input interface for power supply (please check section 1.4).

USB

1 2 3 4 5 6 7

Robustel GoRugged M1000 UP Quick Guide RT_QG_M1000 UP_v.1.0.0 25.01.2014 1 / 7 Robustel GoRugged M1000 UP Quick Guide Chapter 1. Interface Introdu

Robustel GoRugged M1000 UP Quick Guide RT_QG_M1000 UP_v.1.0.0 25.01.2014 2 / 7 1.4 Power Supply The power supply range is 6 to 26 VDC. Note: P

Robustel GoRugged M1000 UP Quick Guide RT_QG_M1000 UP_v.1.0.0 25.01.2014 3 / 7 2.3 Connect the Modem to External Device User can use the USB

Robustel GoRugged M1000 UP Quick Guide RT_QG_M1000 UP_v.1.0.0 25.01.2014 4 / 7 2. Right-click to enter Properties and then click Update Driver.

Robustel GoRugged M1000 UP Quick Guide RT_QG_M1000 UP_v.1.0.0 25.01.2014 5 / 7 4. Click Browse to locate the position of the USB driver which can

Robustel GoRugged M1000 UP Quick Guide RT_QG_M1000 UP_v.1.0.0 25.01.2014 6 / 7 7. Select the USB modem and right-click to enter “Properties”. In

Robustel GoRugged M1000 UP Quick Guide RT_QG_M1000 UP_v.1.0.0 25.01.2014 7 / 7 4. Select the simulated COM port and match the parameters as belo

Sin comentarios

Robustel M1000 UP Quick Guide Manual de usuario