Robustel M1000 Pro V2 Guía de usuario descargar pdf (Pagina 22)

Robustel GoRugged M1000 Pro V2 User Guide

RT_M1000 Pro V2_UG_v01.00 23.11.2012 21 / 49

Confidential

3.2.2 Management via TCP connection

1. Double click “DTU Configurator.exe” to start the software.

2. Click on the operation area, you can see the popup window as below:

3. Select “TCP” and the correct mode in the drop down boxes, and enter the local TCP port. If you choose client

mode, you need to enter the remote gateway’s IP address. Then click “OK”.

4. Click button.

a) If you choose TCP client mode, the configurator will establish a TCP connection to the remote gateway

which works as TCP server.

b) If you choose TCP server mode, the configurator will be in listening status. Then you need to send an SMS to

the remote gateway to trigger it to establish a TCP connection with configurator. The form of SMS is “0009,

configurator’s IP address, configurator’s TCP port”.

Note:

i. The NMS function of gateway must have been enabled. Please refer to 3.2.17 NMS.

ii. The cell phone’s number must be included in gateway’s phonebook.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 49 50

Sin comentarios

Robustel M1000 Pro V2 Guía de usuario Pagina 22