
Robustel GoRugged M1000 Pro V2 User Guide
RT_M1000 Pro V2_UG_v01.00 23.11.2012 30 / 49
Confidential
Always Online: Gateway will automatically a GPRS/UMTS connection after power on and
each restarts, this will remain and will be re-established after an interruption.
Connect On Demand: After selection this option, user could configure wakeup at preset
time, wakeup by Call, wakeup by SMS, wakeup by local serial port data at Wakeup Tab.
User could configure this field after setting gateway under Connect On Demand mode,
input from 10 to 1200 seconds.
This field specifies the idle time setting for GPRS/UMTS auto-disconnection and trying to
revert back to preferred SIM card.
Max Retries
@
Connection
Control
The maximum retries times for automatically re-connect when gateway fails to dial up,
input from 1 to 60.
After maximum retries, gateway will reboot the wireless module. If gateway still cannot
dial up successfully, it will try to switch to the other SIM card. Then gateway will
re-connect with the other SIM card with maximum retries.
When connecting successful, the Max Retries counter will be set to 0.
Gateway will automatically re-connect with this interval when it fails communicating to
peer via TCP or UDP, input from 10 to 1200 seconds.
Enable
Online
Notification
Click to enable Online SMS Notification function, which will send SMS to the phone
numbers included in the Phone Group in this tab.
Online SMS Notification includes follow information:
Name:
Reg:
RSSI:
Operator:
Local IP:
Time:
Note: Local IP is the gateway’s IP address assigned by ISP when dial-up to cellular network
successful.
Set the phone group which the online SMS notification sent to.
Shut Down
Module
When Idle
Enable to set the gateway to shut down module when connectivity is in idle state. This
function only can be configured under Connect On Demand mode.
Address @
Ping Control
(ICMP)
Gateway will ping this address to check that if the current connectivity is active.
Set the ping interval time.
Max Retries
@ Ping
Control
(ICMP)
If gateway ping the preset address timeout continuously for Max Retries time, it will try
to re-connect to GPRS/UMTS network, or it will switch to the other SIM card if you
enable the Ping timeout continuously in Failover Policies.
0 stands for gateway only try to keep to ping the address continuously and will do
nothing else even timeout every time.
Comentarios a estos manuales