Robustel R3000 Lite User Guide Manual de usuario descargar pdf (Pagina 32)

Robustel GoRugged R3000 Lite User Guide

RT_UG_R3000 Lite_v.1.0.0 23.12.2013 31 / 113

Confidential

Connection Mode

Select from “Always Online” and “Connect On Demand”.

Always Online: Auto activates PPP and keeps the link up after power on.

Connect On Demand: After selection this option, user could configure

Triggered by Serial Data, Triggered by Periodically Connect and Triggered by

Time Schedule.

Note: If you select several connect on demand polices, router only have to

meet one of them to be triggered.

Connect

Demand

Redial Interval

Router will automatically re-dial with this interval when it fails

communicating to peer via TCP or UDP.

Max Retries

The maximum retries times for automatically re-connect when router fails

to dial up.

After maximum retries, router will reboot the wireless module. If router still

cannot dial up successfully, it will try to switch to the other SIM card. Then

router will re-connect with the other SIM card with maximum retries.

After successful connection, the Max Retries counter will be set to 0.

ICMP Detection Primary

Server

Router will ping this primary address/domain name to check that if the

current connectivity is active.

8.8.8.8

ICMP Detection

Secondary Server

Router will ping this secondary address/domain name to check that if the

current connectivity is active.

8.8.4.4

ICMP Detection Interval

Set the ping interval time.

Null

ICMP Detection Timeout

Set the ping timeout.

ICMP Detection Retries

If Router ping the preset address/domain name time out continuously for

Max Retries time, it will consider that the connection has been lost.

Reset The Interface

Enable to reset the cellular/ETH interface after the max ICMP detection

retries.

Serial Output Content

The content which output to the serial device which connect to router and

inform it that router is ready to receive serial data.

Null

Triggered by Serial Data

Tick this check box to allow router automatically connects to cellular

network from idle mode when there is data comes out from serial port.

Enable

Triggered by Tel

Tick this check box to allow router automatically connects to cellular

network from idle mode when make a voice call to router.

Disable

Triggered by SMS

Tick this check box to allow router automatically connects to cellular

network from idle mode when send a specific SMS to router.

Disable

SMS Connect Command

Users shall send this specific SMS to trigger router to connect to cellular

network.

Null

SMS Disconnect

Command

Users shall send this specific SMS to trigger router to disconnect to cellular

network.

Null

SMS Connect Reply

When router connects to cellular network, it will automatically send out this

SMS to specific users (set in the Phone Group).

Null

SMS Disconnect Reply

When router disconnect from cellular network, it will automatically send out

this SMS to specific users (set in the Phone Group).

Null

Phone Group

Click to add Phone Group to Set specific users’ phone Book and which

phone Group they are belonged to.

Null

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 113 114

Comentarios a estos manuales

Sin comentarios

Robustel R3000 Lite User Guide Manual de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Routers Robustel R3000 Lite User Guide