Robustel R3000 User Guide Manual de usuario Pagina 74
- Pagina / 132
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 73 / 131
Confidential
high confidentiality and security are required.
PFS Group
PFS_NULL: Disable PFS Group
MODP768_1: Uses the 768-bit Diffie-Hellman group.
MODP1024_2: Uses the 1024-bit Diffie-Hellman group.
MODP1536_5: Uses the 1536-bit Diffie-Hellman group.
PFS_NULL
Life Time @ SA
Parameter
Set the IPSec SA lifetime.
Note: When negotiating to set up IPSec SAs, IKE uses the smaller one
between the lifetime set locally and the lifetime proposed by the peer.
28800
DPD Time Interval
Set the interval after which DPD is triggered if no IPSec protected
packets is received from the peer.
DPD: Dead peer detection. DPD irregularly detects dead IKE peers.
When the local end sends an IPSec packet, DPD checks the time the last
IPSec packet was received from the peer. If the time exceeds the DPD
interval, it sends a DPD hello to the peer. If the local end receives no
DPD acknowledgment within the DPD packet retransmission interval, it
retransmits the DPD hello. If the local end still receives no DPD
acknowledgment after having made the maximum number of
retransmission attempts, it considers the peer already dead, and clears
the IKE SA and the IPSec SAs based on the IKE SA.
180
DPD Timeout
Set the timeout of DPD packets.
60
Enable Compress
Tick to enable compressing the inner headers of IP packets.
Disable
Enable ICMP
Detection
Click to enable ICMP detection.
Disable
ICMP Detection
Server
Enter the IP address or domain name or remote server. Router will ping
this address/domain name to check that if the current connectivity is
active.
Null
ICMP Detection Local
IP
Set the local IP address.
Null
ICMP Detection
Interval
Set the ping interval time.
30
ICMP Detection
Timeout
Set the ping timeout.
5
ICMP Detection
Retries
If Router ping the preset address/domain name time out continuously
for Max Retries time, it will try to re-establish the VPN tunnel.
3
- Robustel GoRugged R3000 1
- User Guide 1
- Contents 7
- Chapter 1. Product Concept 9
- Confidential 10
- 1.3 Specifications 11
- Chapter 2. Installation 15
- 2.2 PIN assignment 16
- 2.3 USB interface 16
- 2.4 Reset Button 17
- 2.5 Ethernet ports 17
- 2.6 Mount the Router 18
- 2.9 Ground the Router 19
- 3.3 Control Panel 24
- 3.4 Status -> System 25
- 3.5 Status -> Network 28
- 3.6 Status -> Route 29
- 3.7 Status -> VPN 29
- 3.8 Status -> Services 30
- 3.9 Status -> Event/Log 31
- 4.1 Interface 109
- 4.1.1 Console port 109
- 4.1.2 Digital Input 110
- 4.1.3 Digital Output 110
- 4.1.5 RS485 111
- 4.1.4 RS232 111
- 4.2 Cellular 112
- 4.2.1 Cellular Dial-Up 112
- 4.3 Network 116
- 4.3.1 NAT 116
- 4.3.2 L2TP 117
- L2TP_CLIENT: 118
- 4.3.3 PPTP 119
- 4.3.4 IPSEC VPN 121
- 4.3.5 OPENVPN 123
- OPENVPN_CLIENT: 124
- USER EXEC MODE: 126
- PRIVILEDGED EXEC MODE: 126
- 5.3 Commands reference 132
Relacionado con productos y manuales para Routers Robustel R3000 User Guide
Routers Robustel R3000 NU Manual de usuario
(111 paginas)
(111 paginas)
Routers Robustel R3000 Lite User Guide Manual de usuario
(114 paginas)
(114 paginas)
Routers Robustel M1000 User Guide Manual de usuario
(85 paginas)
(85 paginas)
Routers Robustel W800 Manual de usuario
(60 paginas)
(60 paginas)
Avsl 172.790 QMX4.1 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Akcesoria audio Avsl 172.790 QMX4.1.
Dostarczamy 1 pdf podręczników Avsl 172.790 QMX4.1 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentarios a estos manuales